Reconnect with your Deck, with Hold It Mate® Always Free Shipping over $24.

Must Have

BEST SELLERS

Hold It Mate 18" Flower Basket or Bird Feeder Hanger Kit $ 24.99
This is a complete kit with a 6" mounting rail and 18" Extension Hook.  The Hook extends away from the deck railing about 15 inches.  It is designed to be a very sturdy holder of anything you want to hang from your deck railing - either side of your railing!  Purchase 3 sets and space them on your railing for a beautiful look of hanging baskets or bird feeding options!   Even Wind Chimes!  Holds up to 15 lbs  Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!   Measure before you order.   NEW DESIGN in 2020 with thicker single wire vs older looped design.
Sold out
Hold It Mate 32” Bird Feeder Hook & 6" Mounting Rail Kit $ 29.99
  Includes both the 6” Hold It Mate mounting rail & (1) 32” Extension Hook.  This is a complete kit to install on your vertical railing systems!  Hold It Mate Rails and accessories are made of powder coated steel and stainless steel hardware for a long life.   The only tool you need is an Allen wrench, and that is included. Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!  Measure before you order.
Hold It Mate Fixed Planter Bracket & Mounting Rail Kits from $ 34.99
Kit Includes: (2) Fixed Planter Box Brackets and (1) 20" Mounting Rail or (1) 36" Mounting Rail depending on length of your planter box.   Fits any plastic/resin planter box tray that is 6 3/4" wide on the bottom (measure bottom of your box front to back). Use your own planter box or bring the planter box brackets to your favorite garden center and find the right fit!  Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!  Our Scratch and Dent items are inspected and re-boxed and are guaranteed to have all parts.  Most are simply unused returns.  None are damaged - maybe minimal scuffs that will probably happen to all kits when in use!  Buy them until they are gone!   
Hold It Mate Adjustable Universal Brackets & Mounting Rail Kit from $ 37.99
The best bracket kit to fit the widest variety of boxes!  Will hold a box that is 5 1/2" to 8 1/2" wide at the bottom (Measure front to back).  Choose either a 20" or 36" Option based on your planter box size.  Fits round, square, aluminum, wood, PVC, wrought iron, recycled vertical spindles that are no further than 5" apart and are a 1/2" to 1 3/4" thick.  Code for the gap between spindles in the US is typically less than 4" - to which our systems were designed.   Measure before you order.   The mounting rail is the same Hold It Mate rail used for every other accessory and connects easily with the included Allen wrench in minutes and the shelf brackets just snap into place.  Once this is done, simply snap on the brackets, loosen the wing nuts on the bottom, drop your planted box on the brackets, then slide the brackets up snug to the box and tighten the wing nuts. Done!    Includes: (1) Hold It Mate mounting rail (20" or 36"), (2) Adjustable Universal Planter Brackets Our Scratch and Dent items are inspected and re-boxed and are guaranteed to have all parts.  Most are simply unused returns.  None are damaged - maybe minimal scuffs that will probably happen to all kits when in use!  Buy them until they are gone!    

Thank you for Buying Direct from our Family Owned & Operated Business!

Cool NEW Unique Kits!

Hold It Mate Flag Pole Kit $ 49.99
By Popular Demand, we are excited to bring to our customers - The Hold It Mate Flag Pole Kit!  Will hold sleeved flags up to 30" wide or grommeted flags of 24" or 30".  Folds down when not in use.   Everything you need to hang a flag from your deck railing is included.  Connects perfectly to vertical spindles only - as all Hold It Mate products are.  Fits a wide range of spindle varieties from Wrought Iron, Aluminum (round or square), PVC/Vinyl, Trex Recycled varieties as well as wood!  1/2" to 1 3/4" thick spindles.   As are all Hold It Mate products, the flag kit is not permanent, but it is very secure when installed.  Mounts are fixed at 19.5" apart when installed - meaning you need at least that to mount the system. Most spindles are at least 30" long.   Follow the directions of setting up the first parts on your table or floor - the rest will come together far easier!!     
Hold It Mate Beverage/Torch Canister Holder $ 29.99
Brand New Product!   Tiki Torches are very popular, but until now there has never been a safe secure way to add them to your deck railing.  The Patented Hold It Mate System solves it! Solid Powder Coated Steel - treated with a UV finish. Add multiple holders around your deck for complete mosquito coverage! ...or complete beverage management!  The holders are adjustable with three heights 1 1/2" at a time - use the tallest version to get the tiki canister up above your railings handrail.  Choose the lower if it will be used for a beverage!  The inside dimension is 2 3/4" perfect for many beverages or the tiki cannisters!  It has 3 adjustable positions on the holder - each 1 1/2" - and The Hold It Mate Mount also installs at any height on your railing - so there is endless adjustability! This system installs just like all other Hold It Mate products!  Choosing the right bolt to install your system on your railings is your first step - Hold It Mate fits spindles ranging from 1/2" to 1 3/4" - Even up to 2 1/4" if you send us a note needing a bolt to fit very wide spindles (this is rare).  Wrought Iron Spindles are usually 1/2" to 3/'4" Aluminum typically is 3/4" PVC/Vinyl Spindles range from 1" to 1 1/4" Trex style is typically 1" - 1 1/4" Wood is anywhere from 1 1/4" to 1 3/4" Follow our videos on this site for easy install instructions.  Please do not over tighten - if the bolt stops turning you have gone too far and need to use a shorter bolt for your application.  ReConnect with your Deck, with Hold It Mate!
Hold It Mate WALL Mounted Rail Kits (35" Long) from $ 29.99
Brand New!    Install Hold It Mates WALL MOUNT directly to a wall, fence - under a window as a window box holder - get creative!  System holds ALL Hold It Mate accessories - these are THREE different pre-built kits.  One includes (2) of our fixed planter box brackets that will hold a planter box that is 6 3/4" wide (front to back measurement on the bottom - the part that sits on the brackets!).  The other includes (2) of our Adjustable Universal Brackets that will hold a box from 5 1/2" to 8 1/2" (also measuring the bottom of the box front to back).  We scratch our heads why box manufacturers only provide the top width - that means very little.   Lastly is our shelf kit - awesome to attach to the house next to the grill and drop on a nice board of your own to create a shelf or ledge!  Under a window to set a larger planter box - get creative!  Systems will hold over 35 lbs when properly attached. The mounting rail is screwed into your wall - so this is up to you on how you want to attach it as there are dozens of different materials and only you will know what to use.  Some installs need to be pre-drilled, others simply screwed in.  Sometimes it's stucco and needs concrete screws, other times vinyl, steel or some sort of lap siding - so find the studs or wood window frame inside the wall - other times it's right to a wood fence.  We include 4 stainless thick screws that may work for you - however, please do your research prior to installation.   When installed, and a box is placed on the mount - the hardware nearly disappears!  In off seasons - you can easily take the brackets off the mount and store.   Send us a note if you have any questions at all - always happy to assist!
Hold It Mate Adjustable Height Dog Bowl Kits from $ 29.99
Place your dogs food and water bowl at any height on your decks railing!   Choose either our single (1) 2 QT Bowl or double (2) 2QT Bowls!  Either offer Fido lots of water or also food and water out on the balcony or deck!   Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance! 
Hold It Mate Flat/Shelf Brackets & Mounting Rail Kit from $ 39.99
Want a shelf to hold beverages on your decks aluminum/wood/wrought iron/PVC railing?   Want a shelf between chairs on your balcony that doesn't take up so much space as a floor table does?  Want a side table for the grill?  Want a table that won't blow over in the wind?   Then this is what you need! Fits round, square, aluminum, wood, PVC, wrought iron, recycled vertical spindles that are no further than 5" apart and are a 1/2" to 1 3/4" thick.  Code for the gap between spindles in the US is typically less than 4" - to which our systems were designed.   Measure the thickness of your spindles and the space between them before you order.  The mounting rail is the same Hold It Mate rail used for every other accessory and connects easily with the included Allen wrench in minutes and the shelf brackets just snap into place.  Once this is done, simply lay your wood shelf on the brackets, line up the shelf where you want it and mark the holes with a pencil - use screws that are about as long as your board is thick, no longer and with a screwdriver, screw 4 screws into the shelf - you are done!   Should take less than 15 minutes to install everything, it really is easy and simple.   Includes: (1) - 20" or 36" Hold It Mate mounting rail, (2) - Shelf brackets You will Need: 1 x 12 x 20" - 36" wood shelf depending on kit size (we recommend a cedar or sealing a pine board) (4) 3/4" wood screws that will fit through the shelf bracket holes, but not all the way through the wood top!   Also, see the tempered glass shelf a customer did in the photos, he placed rubber grippers under the glass and on the brackets to hold in place - beautiful look!   ReConnect with your Deck, with Hold It Mate!

UNIQUE

PATENTED

MODULAR

SOLUTION

Click the box for all of our Pre-Built Kits!

Hold It Mate Solves all the deck railing garden & décor issues! Clamps to nearly ALL vertical spindled railings with ease!

See Complete Kits
What others have to say

TESTIMONIALS

"

This is one of the best products for our deck I have ever purchased. We needed a way to use our existing planters this is a great product and I would recommend it

"
John H. Engel
"

I used to have flower boxes that mounted to the top of the rail on the deck. They were old and ratty so I was looking for replacements. What a pleasure to find these Hold It Mates! Could not be easier to install. Practically invisible from the deck side and can leave them in place for the winter, minus the plastic flower boxes. These make the flowers look so classy, no containers to block the view.

"
Shey
"

I am so happy I purchased this. Most of the hangers that fit over the railing and required to screw in from the bottom are a real pain to assemble and put on the railing.
This is so easy to put on the railing and very sturdy when hanging bird feeders or medium sized plants.

"
Suzanne S
Hold It Mate Accepts: Visa Mastercard American Express PayPal Amazon Apple Pay Google Pay Shop Pay Discover