Hold It Mate 18" Flower Basket or Bird Feeder Hanger Kit $ 24.99
This is a complete kit with a 6" mounting rail and 18" Extension Hook.  The Hook extends away from the deck railing about 15 inches.  It is designed to be a very sturdy holder of anything you want to hang from your deck railing - either side of your railing!  Purchase 3 sets and space them on your railing for a beautiful look of hanging baskets or bird feeding options!   Even Wind Chimes!  Holds up to 15 lbs  Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!   Measure before you order.   NEW DESIGN in 2020 with thicker single wire vs older looped design.
Hold It Mate 32” Bird Feeder Hook & 6" Mounting Rail Kit $ 29.99
  Includes both the 6” Hold It Mate mounting rail & (1) 32” Extension Hook.  This is a complete kit to install on your vertical railing systems!  Hold It Mate Rails and accessories are made of powder coated steel and stainless steel hardware for a long life.   The only tool you need is an Allen wrench, and that is included. Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!  Measure before you order.
Hold It Mate Fixed Planter Bracket & Mounting Rail Kits from $ 34.99
Kit Includes: (2) Fixed Planter Box Brackets and (1) 20" Mounting Rail or (1) 36" Mounting Rail depending on length of your planter box.   Fits any plastic/resin planter box tray that is 6 3/4" wide on the bottom (measure bottom of your box front to back). Use your own planter box or bring the planter box brackets to your favorite garden center and find the right fit!  Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!  Our Scratch and Dent items are inspected and re-boxed and are guaranteed to have all parts.  Most are simply unused returns.  None are damaged - maybe minimal scuffs that will probably happen to all kits when in use!  Buy them until they are gone!   
Hold It Mate Adjustable Universal Brackets & Mounting Rail Kit from $ 37.99
The best bracket kit to fit the widest variety of boxes!  Will hold a box that is 5 1/2" to 8 1/2" wide at the bottom (Measure front to back).  Choose either a 20" or 36" Option based on your planter box size.  Fits round, square, aluminum, wood, PVC, wrought iron, recycled vertical spindles that are no further than 5" apart and are a 1/2" to 1 3/4" thick.  Code for the gap between spindles in the US is typically less than 4" - to which our systems were designed.   Measure before you order.   The mounting rail is the same Hold It Mate rail used for every other accessory and connects easily with the included Allen wrench in minutes and the shelf brackets just snap into place.  Once this is done, simply snap on the brackets, loosen the wing nuts on the bottom, drop your planted box on the brackets, then slide the brackets up snug to the box and tighten the wing nuts. Done!    Includes: (1) Hold It Mate mounting rail (20" or 36"), (2) Adjustable Universal Planter Brackets Our Scratch and Dent items are inspected and re-boxed and are guaranteed to have all parts.  Most are simply unused returns.  None are damaged - maybe minimal scuffs that will probably happen to all kits when in use!  Buy them until they are gone!    
Hold It Mate Container Ring Kit with Mounting Rail $ 24.99
 PRE-SALE ONLY on the 10" Kits!  Items will ship during the week of May 9, 2022 8" Kits are available and shipping. Hold It Mate - Reconnect with your Deck! This is a Bundle of One (1) 6" Hold It Mate Rail & One (1) 8" (00740) or (1) 10" (00715) Planter Ring.  Does not include a pot, you may use your own or bring the ring to your favorite garden center and find a perfect fit - we guarantee you will find a 8" - 10" pot that fits.   Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!  Measure the thickness of your spindles as well as the open space between them before you order.   Hold It Mate Rails and accessories are made of powder coated steel and stainless steel hardware for a very long life.   The only tool you need is an Allen wrench, and that is included - see below for simple installation instructions. Hold It Mate is Patented
Hold It Mate Bird Feeder Special Multi-Hook Kit & Mounting Rail from $ 49.99
PRE-SALE ONLY!  Items will ship during the week of May 9, 2022 One kit consists of either (2) or (3) 32" Bird Feeder Hooks & (1) (20" or 36") Mounting Rail to connect to your deck or balconies vertical railing system.  The 20" Mounting Rail comes with (2) hooks and the 36" with (3) hooks.   Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!  Measure your spindle thickness as well as open space between them before you order! 
Hold It Mate Trough Hooks & Mounting Rail Kit for Flat Iron Cocoa Lined Wire Troughs from $ 37.99
Enjoy the ease of mounting a flat iron trough on your railings with Hold It Mate's Patented System!   ***Video shows the Mounting Rail, but different brackets - showing simply to show how easy it is to install*** Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Measure the thickness of your spindles and the open space between them before you order!  Send us a message if you need further assistance!  Choose 20" Kit (00727) for Planters up to 30" Wide or 36" Kit (00741) for Up to 42" Wide Planters.  Will hold ANY flat iron/metal cocoa lined trough style planter!   WAY better than zip tying to your railing!   Our patented system connects securely to your railing and your trough will simply hang on the hooks provided!  No zipping screws into your railing/deck posts, etc.  Installs in minutes with the included Allen wrench.   No harm to your railings at all!  Attach your mounting rail up high, down low or stack them for a full flowery look!   The design ability of these things is amazing!   Oh...and the hardware virtually disappears once you've placed your planter on the hooks!    Happy Planting!
Sold out -13% sale
00
DAYS
00
HRS
00
MIN
00
SEC
Hold It Mate Container Garden Kit with 36" Mounting Rail $ 49.99 $ 56.96
Hold It Mate - Reconnect with your deck!  This 36" Rail System comes complete with 3 - 10" planter rings for you to use your own pots.  The rings are 9 1/2" ID (Inner Dimension)  Hold It Mate Rails and accessories are made of powder coated steel and stainless steel hardware for a very long life. Comes with stainless steel hardware for a long life. Fits round, square, aluminum, wood, PVC, wrought iron, recycled vertical spindles that are no further than 5" apart and are a 1/2" to 1 1/2" thick.  Code for the gap between spindles in the US is typically less than 4" - to which our systems were designed. Measure before you order.   Hold It Mate is Patented.   
Hold It Mate Adjustable Height Dog Bowl Kits from $ 29.99
Place your dogs food and water bowl at any height on your decks railing!   Choose either our single (1) 2 QT Bowl or double (2) 2QT Bowls!  Either offer Fido lots of water or also food and water out on the balcony or deck!   Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance! 
Hold It Mate Accepts: Visa Mastercard American Express PayPal Amazon Apple Pay Google Pay Shop Pay Discover