Hanging Kits (3)

This is a complete kit with a 6" mounting rail and 18" Extension Hook.  The Hook extends away from the deck railing about 15 inches.  It is designed to be a very sturdy holder of anything you want to hang from your deck railing - either side of your railing!  Purchase 3 sets and space them on your railing for a beautiful look of hanging baskets or bird feeding options!   Even Wind Chimes!  Holds up to 15 lbs  Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!   Measure before you order.   NEW DESIGN in 2020 with thicker single wire vs older looped design.

  Includes both the 6” Hold It Mate mounting rail & (1) 32” Extension Hook.  This is a complete kit to install on your vertical railing systems!  Hold It Mate Rails and accessories are made of powder coated steel and stainless steel hardware for a long life.   The only tool you need is an Allen wrench, and that is included. Fits VERTICAL railing spindles that are built to code...which allows a 4" open space between the spindles.  Connects to a wide variety of spindles with our included hardware kits - no further tools needed.  From 1/2" to 1 3/4" spindle widths.  Wrought Iron is usually 1/2", Aluminum typically 3/4", PVC/Vinyl and Trex style are typically 1" -1 1/4" and finally wood can be 1 1/4" to 1 3/4"  - Simply use the bolt that is just a little longer than the thickness of the spindle...easy to find out which bolt to use by holding the bolts up against your spindles. Send us a message if you need further assistance!  Measure before you order.

At Long Last!!  The NEW Triple Hook Kit is prepared to hang feeders those fun to watch birds for a looooong time!  This kit is more vertical than our other hooks - It will be 27" from the top of the included Hold It Mate mount.   So plenty of bird watching to come!  Holds up to 20 lbs in total.  As usual - Hold It Mate will fit the below: Short Bolt: 1/2' Wrought Iron Spindles Short Bolt: 3/4" Aluminum Spindles (most railings)  Middle Bolt 1" - 1 1/4" PVC/Vinyl/TREX Spindles Long Bolt: 1 1/4 - 1 3/4 Wood  Our Medium Mounting Rail is included with all kits - this for proper stabilization.  We do not recommend connecting this hook to our 6" mounting rails.  They aren't designed to hold this amount of weight and off balance loads like the longer rails are.   To install - simply connect the triple hook into the long pole and insert locking pin.  From there - follow our Hold It Mate Mounting rail instructions.  Once the mount is connected - clip on the triple hook to the middle of the LONG part of the mounting Rail - NOT a six inch mounted side...  This is for proper balance of the hook kit.  Some pics show with a 6" rail - this is ONLY for photo's.   Finally - please balance your load!  Hanging 15lbs on one side and 5lbs on the other isn't a good idea.   If you're using three feeders - hang the heaviest one in the middle!  Our Scratch and Dent items are inspected and re-boxed and are guaranteed to have all parts.  Most are simply unused returns as well as scratched upon arrival.  None are damaged beyond use at all - maybe minimal scuffs & scratches that will probably happen to all kits when in use!  Buy them until they are gone!