Currently Out of Stock Until Approximately September 23, 2019
Use with UP to a 36" Shelf. Want a shelf to hold beverages on your decks aluminum/wood/wrought iron/PVC railing? Want a shelf between chairs on your balcony that doesn't take up so much space as a floor table does? Want a side table for the grill? Want a table that won't blow over in the wind? Then this is what you need!
Fits round, square, aluminum, wood, PVC, wrought iron, recycled vertical spindles that are no further than 5" apart and are a 1/2" to 1 1/2" thick. Code for the gap between spindles in the US is typically less than 4" - to which our systems were designed. Measure before you order.
The 36" Shelf Kit comes complete with a 36" Hold It Mate mounting rail and 2 shelf brackets. The shelf brackets are 10" long and are perfect for holding a 1 x 12 x 36" wood board of your choosing from your local lumber yard/hardware store or DIY center such as Lowe's, Home Depot or Menards. Usually can find them for around $10 in pine and a little more for cedar.
The mounting rail is the same Hold It Mate rail used for every other accessory and connects easily with the included Allen wrench in minutes and the shelf brackets just snap into place. Once this is done, simply lay your wood shelf on the brackets, line up the shelf where you want it and mark the holds with a pencil - use screws that are about as long as your board is thick, no longer and with a screw driver or drill, slowly screw 4 screws into the shelf - you are done! Should take less than 15 minutes to install everything, it really is easy and simple.
Includes: 1 - 36" Hold It Mate mounting rail, 2 - Shelf brackets
You Need: 1 x 12 x 36" or smaller wood shelf (we recommend a cedar or sealing a pine board) (4) 3/4" wood screws that will fit through the shelf bracket holes, but not all the way through the wood top!
Also, see the tempered glass shelf a customer did in the photos, he placed rubber grippers under the glass and on the brackets to hold in place - beautiful look!